Seeking fabricator for pulpit

[yelbis]

Happy new year to you all.

I am modifying my stainless pulpit and require details for a reasonably priced fabricator in the Brighton area. Requires the swing down steps removing and the two remaining horizontal rails joining together leaving a rounded finish.

Thanks

 

[oldsaltoz]

Well within the capability of most fabrication work shops, and little or no extra for the 'marine' tag.

Ask to see some of their work if you are concerned.

Good luck and fair winds.

 

[Talulah]

Cooney fabrication have a really super duper pipe bending machine that has to be seen to be believed.
I have used them before but they had a long lead time.

 

[Seajet]

If you can't find someone closer, try Chris at CB marine, his workshop is beside Chichester Marina - just drive down the access road as if heading for CYC at the Western end, his workshop is opposite the club.

Despite the location I have found his prices very reasonable, and his craftsmanship second to none.

01243 511273

No connection.

 

[wipe_out]

Happy new year to you all.

I am modifying my stainless pulpit and require details for a reasonably priced fabricator in the Brighton area. Requires the swing down steps removing and the two remaining horizontal rails joining together leaving a rounded finish.

Thanks

I battled to find anyone around Brighton to do stainless work other than SSL who quoted a truly horrific price for the small job I needed done.. I ended up finding another way to solve my problem which cost a grand total of £10 vs their quote of over £500..

Please feedback if you do find someone local that charges a reasonable price for stainless work for anyone looking (including myself) in the future..

 

[VicS]

Happy new year to you all.

I am modifying my stainless pulpit and require details for a reasonably priced fabricator in the Brighton area. Requires the swing down steps removing and the two remaining horizontal rails joining together leaving a rounded finish.

Thanks

Can't help with the Brighton area but if you get desperate

Chris Silverthorn at C&B Marine in Chichester Marina

Oliver Taylor at Taylor Engineering in Emsworth Marina

 

[MM5AHO]

Last winter I fitted a replacement pulpit (insurance job). I was required to get three quotes.
They were: £650, £950 and £1800. All quoting from the same drawing.

I was was quite surprised by the variation.

Insurance chose the cheapest. It was a good job, well done and very happy with it. Wonder what more I'd have got for 3 times the price??

(not much use to you, though, all in Scotland)

 

[Lakesailor]

Wonder what more I'd have got for 3 times the price??

Not a lot, except they were probably busy and just put a daft price in which would have been nice for them if accepted.