Seaclear/GPS

[cerro]

Hello, I wounder if anyone can point me in the right direction I already use Tsunamis software so my GPS is connected and working. What I am trying to do is to get my GPS to work with Seaclear I have it set up with all the charts in ect.
but can not seem to get my GPS position on the chart.
When I go into file and positions I get import,export and export NMEA the last one has now disappeared after opening it for G7T, And the GPS under track wont highlight.If I go into tools and Systems I get NMEA input monitor a blank screen and NMEA output monitor a blank screen Can anyone give me instructions on how to get my position on the chart Thanks for any help Cerro

 

[Talbot]

If you are trying to do it at the same time as viewing Tsunamis, the first programme to grab the comm port will use the GPS signal, any other programme will only be able to access the gps after the first programme is shut down.

 

[cerro]

No I dont use them at the same time and I assume the GPS signal is working what I need to do is configure the system so my position is on the chart. cerro

 

[Talbot]

Not an expert on SeaClear, recommend you try http://groups.yahoo.com/group/gps-navigator/ join the group and put your question.

 

[cerro]

Thanks Talbot, joined the group and it was sorted in no time Cerro