Sarah T gets here bum wiped

[oldgit]

Boat ashore and both outdrives removed with view to renewing rubberware and replacing oil/gerashift seals also to get rid of annoying diff whine.Legs fairly easy to shift using loadsa calor gas and big selection of hammers.Have primered bottom and now she now awaits her fettled legs,hopefully back in drink next Monday.
See the crime scene <A target="_blank" HREF=http://arweb.co.uk/aralbums/Boaters2/cleanbum.thumb.jpeg>HERE</A>

<hr width=100% size=1>If it aint broke fix it till it is.

 

[Mike21]

Link doesn't work

<hr width=100% size=1>

 

[Dave_Snelson]

Yer web-site's fallen over Fred - but good to hear that your boat won't be ahht o' flunter too long.

<hr width=100% size=1>Madoc Yacht Club
<A target="_blank" HREF=http://www.madocyachtclub.co.uk>http://www.madocyachtclub.co.uk</A>

 

[powerskipper]

<A target="_blank" HREF=http://arweb.co.uk/aralbums/Boaters2/cleanbum.sized.jpg> here</A>

<hr width=100% size=1><A target="_blank" HREF=http://powerskipper.mysite.freeserve.com/>http://powerskipper.mysite.freeserve.com/</A>
Julie

 

[oldgit]

Re:thank you Maam!.

Trust a lady to do the job properly.One to many "e" methinks./forums/images/icons/laugh.gif

<hr width=100% size=1>If it aint broke fix it till it is.

 

[Renegade_Master]

fort you wuz after anover boat Fred?

<hr width=100% size=1><A target="_blank" HREF=http://www.suncoastmarine.co.uk>Sun Coast Sea School & Charter</A>

 

[oldgit]

Re: Sarah T gets her bum wiped

Hurumphh going thru one of my "where is all the money going" periods./forums/images/icons/laugh.gif
spect it will still be a P35 whenever.
Ooo an by the way anybody out there ever removed the steering fork on their legs.
I have a seal that needs putting on .Any cunning wheezes or tips afore we grind the steering arm off the shaft in order to get the blimming fork thing out.

<hr width=100% size=1>If it aint broke fix it till it is.

 

[oldgit]

Re: Arrggh.....Need a new ram.

Have discovered leaky outdrive ram,new one needed.Got to come from Belgium so at least 10 days.Grrrr.
Keyparts were cheapest by fair margin.
Steering fork still refusing to budge,out with the grinder methinks./forums/images/icons/laugh.gif

<hr width=100% size=1>If it aint broke fix it till it is.

 

[Renegade_Master]

Re: Arrggh.....Need a new ram.

Ah the joys of outdrives..............you old Broom knocker

<hr width=100% size=1><A target="_blank" HREF=http://www.suncoastmarine.co.uk>Sun Coast Sea School & Charter</A>

 

[Scarron]

Re: Arrggh.....Need a new ram.

Don't spose it's a 290 is it? - I ve just done a new seal kit for a bloke with those, let me know if you'd like to try one? V.economical!

Paul

<hr width=100% size=1>

 

[oldgit]

Re:new ram grief.

Unfortunatly it is a rather rare hybrid that Vilvo only made a few of.Have located a complete shield in USA.......... so only option is bluddy new ram from belgium.

<hr width=100% size=1>If it aint broke fix it till it is.

 

[oldgit]

Re: Arrggh.....Need a new ram.

Grrrrr./forums/images/icons/laugh.gif

<hr width=100% size=1>If it aint broke fix it till it is.