S60+ Tridata & Wind Instruments not working

[Ian_Rob]

I have just lost the function of both of these instruments. Is there a recommended troubleshooting route…..?? They don’t seem to be receiving any power.

 

[PabloPicasso]

Check the power supply, switched off, fuse blown/tripped out, wire disconnected somewhere.

Have you carried out any other work that may have interfered with supply?

Use a circuit tester see if there's power at the switch, then any junctions until you find the issue.

Is a cable disconnected? Good visual inspection of suspect areas.

Be methodical and you'll locate the culprit

 

[earlybird]

If you can get to the backs of the displays try pushing the connecting plugs firmly home. Give them a wiggle.

 

[Ian_Rob]

Thanks for the replies. It isn’t the fuses all are fine…….?

 

[PabloPicasso]

Have you a circuit tester? Is there power present both sides of the fuse when power is on?