Rubber O ring for Deck waste fitting

Z

z1ppy

Well-Known Member
Joined
9 Mar 2008
Messages
2,775
Location
New Forest
Visit site
Afternoon.

Doing some winter chores on the boat this weekend, it seems the rubber O ring around the deck fitting for the waste tank has gone.. it means the deck fitting screws down to far and needs some "persuasion" to get undone..

Dont suppose anyone here can point me in the direction of a source who isnt going to insist on me buying a box of 100 which i will likely never use!?

Thanks in Advance.
 
z1ppy said:
Afternoon.

Doing some winter chores on the boat this weekend, it seems the rubber O ring around the deck fitting for the waste tank has gone.. it means the deck fitting screws down to far and needs some "persuasion" to get undone..

Dont suppose anyone here can point me in the direction of a source who isnt going to insist on me buying a box of 100 which i will likely never use!?

Thanks in Advance.
Click to expand...

Let me know what size it is and I'll see if I have one in stock, [it reminds me I need to renew mine]
 
To measure the O ring measure the ID or the outside of the place where the O ring sits, and its cross sectional diameter.

You can look these up on a chart to ID it, or post the details on here and I will look it up for you. I don't like superglued O rings, and the penalty for failure is water in your tanks. I also thoroughly (waterproof) grease the threads on mine.

Any bearing supplier can supply O rings and cost will have them in stock and most will sell you just one.
 
You must log in or register to reply here.

Share this page

Top