Rotostay E lubrication

[Rum Run]

Hello all,
What lubricant should I put into the freshly cleaned bottom bearings of my Rotostay E?
For reference the balls are Torlon, the outer races are stainless steel and the inner races are part of the middle cartridge made of some engineering plastic, possibly Delrin or similar.
None of the instruction sheets I've found online actually show the same design of the one I have btw.

 

[neilf39]

If you are talking about the swivel I spray in ptfe dry lubricant. For the drum bearing I use thick bicycle oil.

 

[Rum Run]

If you are talking about the swivel I spray in ptfe dry lubricant. For the drum bearing I use thick bicycle oil.

I was referring to the drum bearing. What brand of thick bicycle oil? There seems to be a huge variety of unguents for bikes nowadays.

 

[Thresher]

I was referring to the drum bearing. What brand of thick bicycle oil? There seems to be a huge variety of unguents for bikes nowadays.

The instructions that came with mine said not to use any lubricant. Flush out with fresh water only.

 

[neilf39]

Sorry left the bottle on the boat and can't remember. The drum on mine just has metal balls running on a metal groove and has a lubrication hole on the drum.

 

[Rum Run]

Well it looks like the No Lube camp has the day, judging by the seconders to Thresher's post. Normally I would RTFM but have not got one.
Thanks all.