raytheon/raymarine wind

[robertj]

Just upgraded my RC520 mono chart plotter to a C80 since then the wind instrument is playing up. some times it will start when switched on sometimes it wont, I have to keep turning on then off to start. The wind speed is now not registering and am at a loss as i am no eletrickery type of person.
HELP!!!

 

[LadyJessie]

Difficult to say why. But have you ensured that you have not connected your old NMEA connection to the SeaTalk input? Make sure you still use the NMEA connectors.

If this does not help: go to the support section of the Raymarine webpage. It is very good and if you post a question you normally get a reply within 24 hrs.