ShaunG
Member
Does anyone know what the voltage or resistance should be on a ST30/40 rotavecta wind transducer should be without the display attached.
At the moment i have no voltage and open circuit across the red and blue wires with the meter attached in either direction.
With the display attached i have 6v and 100 ohms with the meter attached 1 way and 6v and open circuit the other way.
I have tried Raymarine and they do not have a transducer to test on.
BTW the transducer is only 3 months old, i cant belive that it has broken already.
If anyone else has been through this before your help would be much appreciated
thanks in advance
At the moment i have no voltage and open circuit across the red and blue wires with the meter attached in either direction.
With the display attached i have 6v and 100 ohms with the meter attached 1 way and 6v and open circuit the other way.
I have tried Raymarine and they do not have a transducer to test on.
BTW the transducer is only 3 months old, i cant belive that it has broken already.
If anyone else has been through this before your help would be much appreciated
thanks in advance
