Raymarine i70s help

[harvey38]

Hi all,

Following on from my other thread of updating the helm and converting analogue gauges to N2K, I'm now
looking at what display to use, although I have a Raymarine e7 & e97 (upper & lower helm ), I want the engine parameters visible all of the time so thinking of a Raymarine i70s. Does anyone know if the i70s can display dual engine parameters as the manual does not state either way.

Thanks in advance.

Rob

 

[nfluester]

we have our twin volvo engine information on our I70s ?

 

[nfluester]

not the best photo I'm afraid:

 

[harvey38]

not the best photo I'm afraid:
View attachment 110838

Thanks for the information, very helpful, it looks like you have RPM and a temperature measurement on there plus speed, are you able to have additional temperatures and pressures on another screen that you can toggle between?

Cheers
Rob

 

[girlofwight]

We’ve got older i70 rather than i70s, and I display all the twin engine data on one page, but as figures rather than dials. I‘m sure s wont offer anything less.

RPM, oil pressure and temperature. Those six take one page, I then have another page for waypoint based nav data, and another for general nav data.

My only gripe is an i70 at each helm, and they have to be programmed individually - when they are on the same network, this should be a press of a button.

If I was speccing again, and had space next budget, I’d have two i70s at each helm.

hth

 

[harvey38]

We’ve got older i70 rather than i70s, and I display all the twin engine data on one page, but as figures rather than dials. I‘m sure s wont offer anything less.

RPM, oil pressure and temperature. Those six take one page, I then have another page for waypoint based nav data, and another for general nav data.

My only gripe is an i70 at each helm, and they have to be programmed individually - when they are on the same network, this should be a press of a button.

If I was speccing again, and had space next budget, I’d have two i70s at each helm.

hth

Interesting, thank you.

I'll have a Raymarine E7 and 95 at each helm that I want to use only for nav/radar so thinking of setting up an i70 or i70s for primary engine data like yourself and secondary data
such as voltage, turbo boost and fuel quantity on another page or worst case, the plotters.

Thanks again for your input.

Rob