radar wires off in scanner plug

[spidy]

can any one help, we have a JRC LCD R1000 radar 1.5kw 6-in display 15NM 12- in RA, we had the mast taken down and some wires have come off the scanner plug, has anyone got the wiring diagram or know where we can get one /forums/images/graemlins/confused.gif

 

[Piddy]

I think it has the connections in the handbook. If you get stuck I can look this coming weekend.

Cheers

 

[spidy]

we have the instruction manual but there is no details on what wire goes where inside the plug, any help much appreciated
many thanks

 

[Talbot]

JRC USA are very good at answering queries, so if all else fails!

IIRC Marconi are the main point of contact in UK, but you will get better help from JRC USA.

 

[Piddy]

Sorry - mental note, must read text befoire replying! I assumed you meant the connections to the turning unit. Now I think you mean the connector on the back of the display unit.
If you pm me I can look inside the plug this weekend and let you know.

Cheers

 

[spidy]

inside the plug is the green plastic inner with ten numbered holes in it, its 8 and 9 that have come off one yellow and one green both thin wires.
many thanks

 

[spidy]

sorry forgot this, the black wires from pins 5&6 that come from the plug and are soldered together but i don't know what wire they are supposed to be soldered to, and the 2 wires [yellow / white ] that were soldered to pins 8&9