Prop nut anode

[Kabadi]

I used to have a shaft anode but now I have a rope cutter there is no room for it. I've been looking for an anode for the end of my prop shaft to go on the thread after the prop nut.

Does such a thing exist? If so where can I get one? Thanks for any advice.

 

[David2452]

Yes, MG Duff make one that comes with a prop nut and is then replacable leaving the prop nut in place.

 

[Baddox]

Be careful that the anode fixes onto the screw thread. The Beneteau type which slide over the prop nut are held in place by a screw that fits into a tapped hole in the end of the prop shaft. It isn’t screwed onto the tread that holds the prop nut in place.
http://www.mgduff.co.uk/mgduff-product-catalog/The+%91Martyr%92+range/Beneteau+type+prop+nuts/

 

[David2452]

These are the ones I mean, not like the Benny ones, these screw on the prop nut itself, you do have to buy the prop nut for the first one though.

http://www.mgduff.co.uk/mgduff-product-catalog/The+%91Martyr%92+range/Martyr+Prop+Nut+Anodes/

 

[VicS]

Are the prop nut anodes as large as the shaft anodes. . If not then they will require more frequent renewal

 

[Kabadi]

Thanks for the help. Now I just need to figure out how they are sized. I guess it is on the thread size?