Precision box spanners?

[nigelmercier]

Anyone know where I can get a set of small metric box spanners, say from M3 upwards?

I don't want the cheap pressed type with fat walls.

This is the sort of thing I mean (unfortunately these are BA):

And these are too big:

 

[David2452]

Anyone know where I can get a set of small metric box spanners, say from M3 upwards?

Would a good set of deep sockets not do, or would they be too short for what you had in mind.

 

[alahol2]

A bit expensive... http://www.ma-shops.co.uk/stahlwille/cat.php5?catid=3091&lang=en&curr=EUR&save=1&PHPSESSID=c1d34f8f315020c2b02f67ba3662b5a6

 

[nigelmercier]

Would a good set of deep sockets not do, or would they be too short for what you had in mind.

Possibly, the immediate task needs 6mm A/F and 30mm depth.

[Later] Thanks, bought these:
http://www.amazon.co.uk/exec/obidos/ASIN/B004MT4KZQ/dolcetto-21

 

[David2452]

Should do nicely, 1/4" drive deep series tend to be 2" (50mm)