This question has probably been asked many times before..so please forgive me asking again... My boat has been unused for a year of so and requires a bit of TLC. All the stainless fittings are a bit grotty and need a good polish...what is the best polish/cleaner or whatever to use for this.. I tried Solvol polish which worked reasonably well, but I am sure that the forumites have better ideas. All advice gratefully received.
Polishing S/S
- Thread starter Appleyard
- Start date
LeonF
Active member
Try Shiny sinks from any supermarket.. works a treat and so much cheaper !!
david_bagshaw
Well-known member
Paper wirh 1600 emery, it os so fine it just apears to buff the object, easily available in strip rolls from engineers merchants , followed by polish with autosolovolsol from motor factors.
solvo on a slow buffing wheel gets a finish better than new
solvo on a slow buffing wheel gets a finish better than new
bluedragon
Active member
I haven't found anything better than Solvol Autosol...
alahol2
Well-known member
Farecla G3 does a good job.