Perspex Windows

[sgball]

Hi all

Can anyone tell me where to get new Perspex Windows and Rubbers for a Hardy Pilot?

Thanks for your help.

Trudie

 

[bryantee]

http://pages.euphony.net/j-p/Pages/intro.html
Hadlow marine

 

[VicS]

I had new windows cut, and in the case of two of them moulded to a curve, by Pecision Plastics in Colchester using the old windows as patterns about 2 years ago.

They didn't do the rubber so I bought that from Cherry's Chandlery in Bournemouth.

 

[John7]

We used them about then too and it was not a very good experience. We were advised to go up one size of screw to over come damage to the old holes and selected a plastic that needed ordering. A date was given when we were to collect the windows and screws. I phoned to ensure they were ready when they were due but when we got there neither the plastic nor the screws had been ordered. We agreed to use a different plastic that was in stock rather than waste a further day. When latter that day we collected them we found the screw holes were the wrong size. When going to fit them found some were not even drilled. When a complaining I was told what did I expect with a rush job and a refusal to reimburse me the cost of getting the missing holes done locally. When finally fitted many holes, even on the flat sheets, were in the wrong place. All in all avoid them if you can or if you do use them we warned as their work does not match the name!

 

[Guest]

Try Crouch Marine Windows for the rubber bits.

 

[dave_gibsea]

Speak to Paul at "Marine Windows" - Caversham near Reading, very helpful, quick and reasonable - 0118 948 2664 or 07836 250219

<P ID="edit"><FONT SIZE=-1>Edited by dave_gibsea on 02/12/2002 13:29 (server time).</FONT></P>

 

[LeonF]

Try Salford house services In Otford near Sevenoaks Kent Tel 01732 464635. Very helpful and creative- see previous postings re:Leaky windows. They do major refurbs and will supply a single tube of adhesive, and very reasonably priced. Talk to Patrick Cole.

L.A.R.Ferguson

 

[stamfordian]

hi, got mine from local glazier,took old as pattern,,Rubbers from wilks....www.wilks.co.uk/wilks.htm,
cheersPS,they have a how to do section.

<A target="_blank" HREF=http://www.arweb.co.uk/argallery/stamfordian>http://www.arweb.co.uk/argallery/stamfordian</A>
<P ID="edit"><FONT SIZE=-1>Edited by stamfordian on 04/12/2002 20:03 (server time).</FONT></P>