Painting bare wood

[Robin2]

How do I get a good paint finish on bare plywood on boat interior with the absolute minimum of time and effort? I don't like sanding or painting.

Are some paints better than others? Preferably a low-odour paint.

 

[NigelBirch]

employ someone?

 

[BrokerBen]

Where in the boat is it going to be?

I would suggest danboline would be easy to paint on, doesn't need much preperation and lasts well, together with it being shiney paint and keeps away mildew (sp?).

Failing that you'll have to rub back, clean, prime/undercoat, flat back with wet and dry or similar, clean again, then paint topcoat, flat back, clean, another top coat until you are happy with the finish /forums/images/graemlins/wink.gif

Just make sure you follow the instructions on the tin for whatever product you use.

 

[Robin2]

Thanks. Sorry, I did not make it clear that I am looking for a decorative finish for walls and furniture. Probably off-white or pale cream, but I would like a wide choice.

The danboline seems to be "industrial" stuff with just a few colours - also slow drying.


While employing someone has some attractions it is not practical because (a) it is too expensive and (b) I want to be able to small areas at any one time.

 

[BrokerBen]

In that case let me suggest international products as they are what I have used.

Depending on where you will buy the products from, the knowledge available will vary, but international have a very clever website now which will be of help.

The thing with paintwork is generally the amount of time you put in is directly preportionable to the quality of finish you end up with.

Using high quality brushes or rollers also helps alot. Get the stuff and paint the lower or hidden parts first to get the hang of it, then work into the more visible parts.

Nobody really enjoys painting and sanding, but it can be rewarding when you end up with a finish you are proud of. Stick with it, dont cut corners or rush and you'll be fine I imagine!