Outboard prop covers/protections

[MapisM]

I'm struggling a bit to find online one of those round covers to put on propellers, as often seen on trailered boats, but also on tenders where the prop is a bit in the way of feet (the latter being my case).Can anyone give me a pointer?
Fwiw, I believe that the prop is either 9 or 10 inches diameter.
TIA!

 

[TSB240]

http://www.ronhalemarine.co.uk/superbasket/product/151/Prop_Guard

 

[BruceK]

I thought you meant a soft cover like this. They also have the above

https://www.force4.co.uk/department...rd/outboard-accessories/prop-bags-covers.html

 

[MapisM]

I thought you meant a soft cover like this.

Yup, something like the one below would be fine.
But it seems that they are only available for 30hp O/Bs and up, while ideally I would want it as small/unobtrusive as possible...

 

[BruceK]

well the above is from 30 to 70hp

this is up to 30hp. I cant find anything smaller

https://ducksback.co.uk/?product=ducksback-outboard-motor-propeller-prop-bagcove

 

[benjenbav]

:encouragement:

 

[BruceK]

:encouragement:

The mighty have fallen :nonchalance:

 

[JerryC]

Seems like I wasn't the only one to misunderstand your need. My first thought was of rotating props very close to feet or other body parts, Yikes, safety first! Maybe you could cadge a little bit of blue canopy cover fabric FOC and get it stitched up to fit over the prop very close to your entry/exit.

 

[MapisM]

well the above is from 30 to 70hp
this is up to 30hp. I cant find anything smaller
https://ducksback.co.uk/?product=ducksback-outboard-motor-propeller-prop-bagcove

Good find, thanks.

@ BJB & JC: yup, both a plastic bucket and a stitched up canopy could be ok for my needs.
I just hoped to find some ready made solution for convenience...
Probably the pointer from BK is as close as I can get to an ideal, easy to fit and remove solution!