One expects to launch next weekend

CliveG

Well-Known Member
Joined
29 Oct 2001
Messages
2,542
Location
Cambridge UK
Visit site
We have got a great load of jobs ticked off this weekend and are on course to get Sirenia afloat on Sunday's high tide at Woodbridge.

Antifouling the hull - complete
Boot Topping - Complete.
Rudder striped back to bear metal, Primed, A/F Under coat, Boot topping - Now waiting for some more antifouling.
Cockpit drains replaced,
Toilet seacocks serviced.
Engine tested.
Outboard tested
Deck to hull joint re-sealed
New stack pack 90% complete.

Just a few things to finish off and then clear out all the unwanted stuff and sort out the bedding etc.

Soon be out sailing:)
 
Yeap! Especially when this winter has seen a build up of mud on the 'beach', and there are some seams to be caulked.

Never quite got round to getting a start preparing that brightwork before the cover comes off. That's 19 consecutive years of failure. Do I get the prize for consistency?
 
Yeap! Especially when this winter has seen a build up of mud on the 'beach', and there are some seams to be caulked.

Never quite got round to getting a start preparing that brightwork before the cover comes off. That's 19 consecutive years of failure. Do I get the prize for consistency?

i guess a prize then.
us with plastic fantastic s just use a damp cloth for a once over job done :rolleyes:
 
One has now launched:D
Easy trip along the A14 to Robertsons, Woodbridge.
Mast up and sails on by late Saturday afternoon.
Nice Pub Meal in the evening.
Launched at 10:30 today on a rising tide.
An very good slipway but the access can be difficalt if someone parks in a silly place.
Great to feel the boat move under foot after so long ashore.

Took a trip down to the Deben Bar.
I am informed that the bar is now a quite large flat area with about 1m depth at LAT.
Not proved that myself yet.

Sirenia is now swiniging round a buoy at Ramsholt:D
 
Bitman

Thanks for the help with mast raising, boat launching and for Saturday's pub meal.

Good to hear that you have successfully extracted your new Evo 25 from Salcombe.
Heres hopeing that the refit goes well.
 
Top