Oil leak volvo 2001 bt

Artimes

Active Member
Joined
8 Oct 2001
Messages
61
Location
Dublin
Visit site
Oil seen dripping from behind large pully at front of engine. After pully is removed, can I expect to see a main bearing cover which when removed will expose, what? a oil seal prehaps, what kind of bearing? sleeve or ball bearing?

thanks
 
When the pulley is off you will see the hexagaonal front cover of the oil pump.

It might be possible to extract the oil seal without removing the cover but it looks simple enough to remove the cover, press out the old seal and press in a new one.

If you take the cover off also renew the O ring seal behind it.

You will need #8 and #9 in this diagram http://www.marinepartseurope.com/en/volvo-penta-explodedview-7726000-21-11591.aspx
 
Top