NMEA connections to Raymarine C120W

[boatmike]

I have mislaid my instruction manual. I have an AIS with a signal wire (brown) and common (green) and I need to connect to the right wires of the C120. Can anyone tell me which wires to connect to and which port they refer to as I need to alter the baud rate on the correct port? Ta!

 

[AngusMcDoon]

Raymarine C120 manuals

 

[boatmike]

Thanks Angus but unfortunately these publications don't give me the colour codes for the wires.

 

[Bobc]

Orange/yellow is in+

Orange/brown is in-

This is for the 38,400 and port

 

[boatmike]

Thanks Bobc but are you sure these are not out+ and out - ?
I have found other info on Raymarine site that suggests
Orange/white in+
orange/green in-
Orange/yellow out+
Orange/brown out-
for port2 but not totally sure, in fact getting more confused the more I look. But it does not take a lot to confuse me at my age.......

 

[Bobc]

Thanks Bobc but are you sure these are not out+ and out - ?
I have found other info on Raymarine site that suggests
Orange/white in+
orange/green in-
Orange/yellow out+
Orange/brown out-
for port2 but not totally sure, in fact getting more confused the more I look. But it does not take a lot to confuse me at my age.......

I took the info straight from the installation manual.