Need your help in getting hold of a 10"x13" pitch Prop

[barrymedway]

Hi Guys and Dolls, i really need your help in getting hold of a 10"x13" pitch Prop L/H, to fit a 3/4 shaft on my Langstone Fisherman Built by W.N.R MEAGHAN BOAT-BUILDERS 402 Locksway Rd, Milton Locks Portsmouth back in the early seventies. With the big day getting nearer for launching it, i am in desperate need of a propeller as some scoundrel :disgust:took a fancy to the one i fitted to it. It was a 10x13 L/H Prop and the shaft is 3/4", so if any kind person has one of these kicking around in the corner of there shed or garage or even there scrap pile, i would be very very grateful and would be only too happy to take it off there hands for cash.
Many thank guys and dolls....

Barry:encouragement::encouragement::encouragement:

 

[superheat6k]

Foulkes Chandlery Barge in Blundell Lane, Bursledon has a container full of props. You will need also to know which hand you require, and I can't explain here which is which, but a right hand prop spins clockwise for fwd viewed from the stern looking forward (or is that left hand ?).

 

[barrymedway]

Thank you will give them a call:encouragement:

 

[superheat6k]

Thank you will give them a call:encouragement:

02380 406349 If you have them you will also need the taper details.

 

[Tranona]

That is not a very common size and you will be really lucky to find a second hand one. The size and rotation would normally be stamped on the boss. A 3/4" will almost certainly have a standard 1:12 taper.

New props are available from a range of suppliers such as www.sillette.co.uk

 

[Javelin]

We use www.castlemarine.co.uk - they have been very helpful with all sorts of prop issues we've had over the last year or so.