laurie the sailer
Member
Hi all
After updating my navionics platium + flash card via their web site, i felt that everything was now updated and should be tickaty boo.
Whilst using the Raymarine C90w i have been happily enough with the combined operation, till now. i noticed that the "T" on the chart plotter screen was missing.
Checked the pc version of the same software, there it was with arrows graphs the lot.
Now being 2 days travel from home port. After a phone call to navionics, very polite and helpfull but no solution.
Raymarine help desk sugested updating the plotter OS. which i now did. A bit nervious about doing the factory reset bit, but hey ho. OS updated, still no "T"
Having to resign myself that that is the way it has to be for the moment i continuied to get the original settings back to the way i wanted, feet to meters ect, only to find that the ais isn't displaying targets, alarm indicating all is working, fired up Neptune Navigation, targets displayed all ok.
Now in Guerncy with only limated wifi, i have emailed Raymarine and await there reply. AIS is Raymarin 650. Guess they will tell me to updat the soft ware on the ais, not sure about that.
Any body had simular problems
Rant over
After updating my navionics platium + flash card via their web site, i felt that everything was now updated and should be tickaty boo.
Whilst using the Raymarine C90w i have been happily enough with the combined operation, till now. i noticed that the "T" on the chart plotter screen was missing.
Checked the pc version of the same software, there it was with arrows graphs the lot.
Now being 2 days travel from home port. After a phone call to navionics, very polite and helpfull but no solution.
Raymarine help desk sugested updating the plotter OS. which i now did. A bit nervious about doing the factory reset bit, but hey ho. OS updated, still no "T"
Having to resign myself that that is the way it has to be for the moment i continuied to get the original settings back to the way i wanted, feet to meters ect, only to find that the ais isn't displaying targets, alarm indicating all is working, fired up Neptune Navigation, targets displayed all ok.
Now in Guerncy with only limated wifi, i have emailed Raymarine and await there reply. AIS is Raymarin 650. Guess they will tell me to updat the soft ware on the ais, not sure about that.
Any body had simular problems
Rant over