Mobo's never heard of cetrek 343

PhilF

PhilF

Well-Known Member
Joined
18 Jun 2001
Messages
2,564
Location
In a state
Visit site
Mobo\'s never heard of cetrek 343

But has anyone here managed to use a c -map nt user card with the cetrek plotter or have I wasted my money ----again
Philf
 
Re: Mobo\'s never heard of cetrek 343

I have no idea, but I have some contacts that may be of use. I was trying to track down a manual for a Cetrx Chartnav 345 in German, the lady below at the 'UK manufacturing facility' put me in touch with someone in Germany who had one.

Tracy Baker
customer service department
Teleflex Morse
Tel: +44 1268 522861 Ext. 372
Fax: +44 1268 534982
email: tbaker@teleflex.com

I got her contact from:

Audra Jarvis
Administration Manager
Teleflex Marine
International Sales & Marketing
P.O.Box 5990
Verwood
Dorset BH31 9AA
England
Tel/Fax: +44 1202 828010
email: ajarvis@teleflex.com
 
Re: Mobo\'s never heard of cetrek 343

Phil

Are you sure you have the correct User Card? C-Map do two versions, visually identical but with different memory capacity. We have an older Raymarine plotter that only uses the smaller memory C-Map User Card and Navman plotters that take the larger memory C-Map User Card, they are not interchangeable. We actually have both cards in order to transfer waypoints and routes between the plotters so they all sing the same song, but you also need C-Map PC Planner and card reader to do this via your PC.

Robin
 
Re: Mobo\'s never heard of cetrek 343

I bought the 2 meg card, perhaps it should be the 128KB, thanks
Philf, will also try JG
 
You must log in or register to reply here.

Share this page

Top