Mirabella press release

StephenSails

Active member
Joined
1 Mar 2003
Messages
1,994
Visit site
Mirabella V has arrived back to her builder, VT Shipbuilding in Portsmouth, following a comfortable voyage from the Mediterranean, for repairs to her lift keel mechanism.

The 75 metre (245 foot) composite sloop went aground near Cap Ferrat following her 600 kg anchor dragging in a freshening breeze. Divers were sent down to examine the hull and keel during and immediately after the grounding. Once the keel was raised 70cm on her own ram, the yacht floated free. Mirabella V then motored to La Ciotat shipyard where she was further examined by yard personnel, representatives of VT Shipbuilding, and surveyors from the classification society, V Ships and MCA. Contrary to the various comments which appeared in the media, the hull and rig are undamaged. The sacrificial tip on one rudder needs to be replaced and the lift keel mechanism needs to be repaired.

‘Mirabella V was already scheduled by VT Shipbuilding to undergo a warranty and maintenance programme before departing for the Caribbean’ commented the owner Joseph V. Vittoria. ‘Therefore the decision was made to have the yacht return to Portsmouth and have the keel removed for comprehensive inspection and repaired whilst the warranty and maintenance programme is under way.

Mirabella V is expected to commence her Caribbean season with her owners spending the New Year on board.


ENDS
October 21, 2004

Issued on behalf of

Jacqui Beadon Yachts

50, rue du Poilu

06230 Villefranche sur Mer

FRANCE

Tel: (33) 493 01 86 71

Fax: (33) 493 01 87 86

Mobile: (33) 611 83 14 80

Website: www.mirabellayachts.com

<hr width=100% size=1><A target="_blank" HREF=http://www.yachtinguniverse.com>http://www.yachtinguniverse.com</A>
 

Talbot

Active member
Joined
23 Aug 2003
Messages
13,610
Location
Brighton, UK
Visit site
Saw her coming in yesterday (werent many other boats out for some reason). Looked much nicer in the flesh than has been shown in some of the photos.

<hr width=100% size=1>
 
Top