MF needs Some Of these

[hlb]

Hole centers seem to be 4 1/2" or 120 MM.

140mm long and 25 mm wide.

Theres a virtual pint for who ever can find them.

This one lookes a bit sad.

It got all bashed up.

 

[PaulGooch]

The look the same as the ones on my old Princess 32 Haydn. I replaced them with some of these :

http://cgi.ebay.co.uk/NEW-STAINLESS...tEquipment_Accessories_SM&hash=item20afdc21dc

Pretty sure the holes more or less lined up, i think i may have just had to slot them a tiny bit, but an email would soon confirm the hole spacings.

 

[hlb]

Thats ok but mine are alloy, dont suppose it matters to much if we replace both.

 

[Bilgediver]

Thats ok but mine are alloy, dont suppose it matters to much if we replace both.

Must be a touch of the welsh influence kicking in....Be a devil and replace both then you 'll have an antique spare for bartering. I have a locker full of antique spares

 

[Searush]

Must be a touch of the welsh influence kicking in....Be a devil and replace both then you 'll have an antique spare for bartering. I have a locker full of antique spares

You could always chuck 'em in the "Marinaskip" - see the link in my sig. below.

 

[tinkicker0]

There ya go HLB. 4.5" hole centres in 316 stainless. I got my new cleats from these guys and had no hassle whatsoever.

Forget these HLB
I goofed again.


http://cgi.ebay.co.uk/NEW-2-X-4-1-2...essories_SM&hash=item53e134266c#ht_2086wt_858

 

[PaulGooch]

There ya go HLB. 4.5" hole centres in 316 stainless. I got my new cleats from these guys and had no hassle whatsoever.

http://cgi.ebay.co.uk/NEW-2-X-4-1-2...essories_SM&hash=item53e134266c#ht_2086wt_858

They don't have 4 1/2" hole centres, they are 4 1/2" LOA with 84mm hole centres.

 

[tinkicker0]

They don't have 4 1/2" hole centres, they are 4 1/2" LOA with 84mm hole centres.

Humpph you are right, did not look at all the blurb. Another damn goof.

I'm getting good at it.




However these do have 122mm hole centres From same outfit:

http://cgi.ebay.co.uk/NEW-2-X-6-316...essories_SM&hash=item5888486802#ht_2087wt_858

 

[PaulGooch]

Humpph you are right, did not look at all the blurb. Another damn goof.

I'm getting good at it.




However these do have 122mm hole centres From same outfit:

http://cgi.ebay.co.uk/NEW-2-X-6-316...essories_SM&hash=item5888486802#ht_2087wt_858

Yup, he's the guy i bought mine from. Had a fair bit of stuff from him when i re-furbed the old P32. He even made me the safety cable/hand rail thingys, nice guy.

 

[hlb]

They seem to say some thing like

Y155 (or SS
ENGLAND
Y185 or S

On them, dunno if it's any help.