Metric boats need support here 10744mm is the correct size

[FullCircle]

I agree with Jimis post that we should all be represented, but as he is from a land that obviously does not embrace euro-avoirdupois, then he must remain marginalised with all the other feet and inches owners.
I proudly stand as representative of the metric boats in the range of 10744mm to lets say 10750mm LOA.

Rally to my call you AWB'ers. This of course will exclude all the MABs as they were probably built using feet and inches or some similar made up measure.

 

[sailorman]

1120m/m non AWB /forums/images/graemlins/blush.gif /forums/images/graemlins/grin.gif

 

[FullCircle]

Roger, you are patently trying to dress as lamb here. You tub, splendid though she undoubtedly is, was scanned and built in 37 imperial feet, and thus belongs in tome's sub forum.
Now, any more???

 

[sailorman]

this tight-wad didnt buy all his gear @ jumbles n brag about it in the "Lower Ranks"

http://www.ybw.com/forums/showthreaded.php/Cat/0/Number/855392/page/0/vc/1

 

[cliff]

34', Can I join your clique? or do I need to start my own - seems I am a good 1½" longer than wee jimi /forums/images/graemlins/smirk.gif
--------------------

"Artificial intelligence is no match for natural stupidity"

 

[Boathook]

Mines 9000mm or 29ft, which ever is cheaper at the marina. If a bit of 12" by 300mm fits the hole, it must be the correct size .....

 

[Slow_boat]

It's not the size, it's what you do with it that counts.

It's true but I can't think where I've heard it before...

 

[FullCircle]

Cliff it would seem you are the owner of an Imperial boat as sailorman. Sadly you must join the Feet and Inches forum, although we would of course value your input as an associate.

 

[FullCircle]

Peter,
<<Mines 9000mm or 29ft, which ever is cheaper at the marina. If a bit of 12" by 300mm fits the hole, it must be the correct size ..... <<

you overstate your case, you are in fact 8839.2mm.
I fear also that 12 inches would not fit the 304.8mm hole....

 

[sailorman]

so Jim i take it your not boating this evening on your shiny 10744mm with the yellow n black smoking jacket in the fotnicatotium /forums/images/graemlins/blush.gif /forums/images/graemlins/blush.gif

 

[Boathook]

I acccept that 29 foot is less that 9m but if a rectangular hole is 12" by 300mm I am more than happy to measure it that way unless the tape measure is only metric ...

 

[FullCircle]

Elementary conversion Old Lad - 12 inches is a foot, and 25.4mm is an inch .Times 25.4 by 12 and you have 304.8mm.....

 

[ex-Gladys]

...can I place a pleafor the marketing afflicted like me? Called a Colvic Victor 35 10.668m, but is actually only 34'3" 10.4394m.... Which forum do I join?????

 

[FullCircle]

Made in Britain, off to the Imperial side with you!

 

[ex-Gladys]

...but which one????? /forums/images/graemlins/confused.gif

 

[Rustyknight]

If in doubt, start your own! /forums/images/graemlins/laugh.gif