Manufacturer of Bavaria oven - LT20?

[nigelmercier]

I need to get a spare part for my oven.

The manual I have says it is an LT20, but it only has Bavaria markings on it.

Any ideas?

 

[michael_w]

Looks just like the one on my X-yacht. You could try their spares dept. I suggest you go direct to Denmark as the agents in Hamble aren't interested in after-sales stuff.

 

[nigelmercier]

[ QUOTE ]
Looks just like the one on my X-yacht. You could try their spares dept. I suggest you go direct to Denmark as the agents in Hamble aren't interested in after-sales stuff.

[/ QUOTE ]

Thanks. Do you have a link?

 

[Bav34]

Bavaria Owners website suggest it is a Techimpex supplied by Bainbridge in the UK.

 

[michael_w]

A bit of googling brought this up.

 

[ShaunG]

http://www.bainbridgemarine.co.uk/conten...p;ProductId=722

Looks like the one, As above made by techimpex, have not checked 100% but we installed one as a direct replacement for a bavaria LT20 at the owners request because he stated that it was the same one,

 

[steve_cronin]

Yes , it\'s made by Techimpex....

..but the spare burners, jets and thermocouples are stocked by a wide variety of chandlers. Watch for the routing of the oven thermocouple pipe though. It only just reaches! Also after removing the four socket screws to lift the hob, BEWARE" The edges of the stainless top are razor sharp.

I know that your boat is in Croatia but a trip down to Gouvia Marina will enable you to get all that you need "off the shelf" from either Peter at Boater's World or Frank at Nautilus.

Steve Cronin

 

[nigelmercier]

Re: Yes , it\'s made by Techimpex....

Thanks for all the help guys. The stud under the RHS burner has broken, so the burner just fell out! I was going to have a go at replacing the stud, but if not I'll get a new burner.

I've removed the four screws on the top, but I don't think I'm going to be able to hook the burners back over the jets from the regulators, so I guess I'll have to take more bits off.

On the other hand, a grill would be nice ...

PS While I was taking it apart I got a phone call from Mrs Nige saying "see you tomorrow". No, say I, I'm coming back on Thursday. Not what your EasyJet booking thinks, says she. D'OH!

 

[johnphilip]

Same cooker fitted to our Elan. Not impressed with it.
If you use the oven the fascia above it gets hot and the knobs get very stiff to turn and almost impossible to adjust accurately.
Any suggestions?

 

[ytd]

We have the same one. Burners are OK but the inside of the oven doesn't seem to get hot enough to cook anything.

 

[Gypsy]

I have the same type. When I first got the boat I was in Antibes and saw the same model in a chandlers with the brand name ENO. I just Googled "ENO Oven" and they are widely supported in UK and elsewhere. If you have access to the web for searching - try it, you are bound to recognise the parts.
Ray