M6 tap and screw supplier - Edinburgh?

[Simso]

Quite a specific request but does anyone know where I can buy a Tap(not die) M6 including the starter tap and also M6 stainless steel countersunk screws (between 30 and 45 mm long)
Edinburgh area? :ambivalence:

 

[nigelmercier]

Don't you have eBay up there?

 

[Simso]

Would really like to do the job tomorrow - otherwise I shall resort to t'internet!

 

[Bilgediver]

Quite a specific request but does anyone know where I can buy a Tap(not die) M6 including the starter tap and also M6 stainless steel countersunk screws (between 30 and 45 mm long)
Edinburgh area? :ambivalence:

For taps go to J Wilkinson .... Arthur St behind Leith walk at Pilrig Church. For bolts or screws The Bosuns Locker at Port Edgar. or Screw fix at Sighthill

http://www.wilkinsonmachinery.com/


http://www.bosuns.co.uk/

 

[Simso]

For taps go to J Wilkinson .... Arthur St behind Leith walk at Pilrig Church. For bolts or screws The Bosuns Locker at Port Edgar. or Screw fix at Sighthill

http://www.wilkinsonmachinery.com/


http://www.bosuns.co.uk/

Thanks Bilgediver - will call J Wilkinson in the morning and hopefully my Barton Clutch (triple) will be fitted in the afternoon.

 

[Bilgediver]

You might get the Bolts at SeaSpan on West Shore Road however John is in the process of moving
so might be difficult to contact also much of his stock is in a container!

http://www.seaspan.co.uk/

 

[cryan]

Cromwell tools should be able to supply everything you need.
https://www.cromwell.co.uk/branches/edinburgh

 

[Simso]

Cromwell tools should be able to supply everything you need.
https://www.cromwell.co.uk/branches/edinburgh

Thanks "Cryan" I now have a few new sources of (goodies) that I never knew existed !