M11 Threaded Rod

[stownsend]

Evening All

I'm after a supplier for some M11 BZP threaded rods / nuts. I've spoken to Costal Rides and I'm after some to use as studs on my VP 290 Transom Shield to bolt it onto my transom as its slightly thicker for the ones supplied.

I'm assuming its M11 (thats what it looks like when I measured it) but if anyone knows any different let me know !!!

Cheers

Stu

Any ideas ?

Cheers

Stu

 

[mikehibb]

M10 or M12 ?

Google Threaded rod suppliers uk

 

[stownsend]

I've tried google for m11 as i took the existing ones to B and Q and measured it against the m10 and m12.

Cheers

Stu

 

[Poignard]

If your boat is old, i.e. pre-metric, it could be a 7/16" imperial thread. [7/16" = 11.11mm]

Also, you don't want BZP [plated mild steel] near the water. You need stainless steel, A4 grade.

 

[H2O]

More than likely 7/16" UN series thread (.4375")O/D
11 mm =.433" O/D both have 60 degree thread form check T.P.I.

 

[zt260]

Try j&l industrial supplies they are engineering suppliers(google them) they should be able to get what you need,i know they do threaded bar.
regds ash

 

[stownsend]

I didn't think of imperial. The engine set is a VP 250A so its a 290 leg with AQ151A engine.

I may buy a M12 bolt just to check but will look at the imperial size.

Thanks for the help.

Cheers

Stu