Looking for a propellor.

[kds]

I have a friend who has had a few problems with his boat ( a centour ) and needs a new propellor.
He needs a 13" diameter; 9" pitch on a 1" shaft. turning clockwise from aft.
Where can he look for a second-hand one ?
Ken

 

[PetiteFleur]

I have a friend who has had a few problems with his boat ( a centour ) and needs a new propellor.
He needs a 13" diameter; 9" pitch on a 1" shaft. turning clockwise from aft.
Where can he look for a second-hand one ?
Ken

Ebay is always good for a look.

 

[yoda]

I have a 14 x 8 for a one inch shaft 1:12 taper Right handed folding prop if interested
Yoda

 

[Jcorstorphine]

I have a friend who has had a few problems with his boat ( a centour ) and needs a new propellor.
He needs a 13" diameter; 9" pitch on a 1" shaft. turning clockwise from aft.
Where can he look for a second-hand one ?
Ken

I have a 14 x 7 Right hand on a 1" shaft.

Are you sure about the handing as Centaurs were fitted with Volvos and their props turn the same direction as the engine. ie they are left hand and turn anticlockwise viewd from the rear. Of course, he may have fitted a new engine with the more normal RH roation.

 

[alahol2]

The chandlery barge at Bursledon used to have a container with loads of second hand props. They could be worth a phonecall.