Lofranes Kobra

[wiggy]

Does anyone know if it possible to fit a gypst that will take both 8mm chain and rope instead of using the capstain end for rope? The reason I ask is thatr my rode is 25m of chain and 40m of 12mm anchorplait, its a right pain having to use the capstain for the rope as it doesn't feed down the hole where the chain goes, hope this makes sence.

 

[Rigger Mortice]

Spares list here http://www.lofrans.it/english/dimensions.html

It may be easier to change to all chain?

 

[Conachair]

Does anyone know if it possible to fit a gypst that will take both 8mm chain and rope instead of using the capstain end for rope? The reason I ask is thatr my rode is 25m of chain and 40m of 12mm anchorplait, its a right pain having to use the capstain for the rope as it doesn't feed down the hole where the chain goes, hope this makes sence.

My kobra has a slot in the gypsy into which the multiplait rope fits so the gypsy can raise rope as well. Needs a bit of care but works pretty well.