KAD43 belt change

[DavidJ]

It's time I replaced my drive belts on my KAD43's
I've followed the tightening procedure many times (torque to 30 ft.lbs etc) so familiar with that. When replacing do I need to remove anything to get to the circulation pump belt?

 

[[2068]]

Part 20 is the circulation belt.

Part 30 on the diagram needs to come off ... the pulley for the Kompressor belt.
Undo the four bolts (parts 31) to remove.

 

[DavidJ]

Thanks so much
I was going to do the job this evening prior to friends coming out tomorrow. Following your very detailed reply and although the task does not seem unduely difficult, I'll do it the day after when I have a bit more time if any snags occur.
Thanks again