concentrik
Well-Known Member
Did Raymarine badge any JRC products? I'm looking for compatibility in Raymarine for a JRC 1500.
Ta
Ta
JRC /Raymarine
- Thread starter concentrik
- Start date
FullCircle
Well-Known Member
They did. I just sold my JRC1800. They supplied quite a few different companies.
Did you want to use a jrc1500 head with a Raymarine scanner or the other way round?
Here is a good component cross reference...
http://www.alphatronusa.com/crossreference.html#jrc
Did you want to use a jrc1500 head with a Raymarine scanner or the other way round?
Here is a good component cross reference...
http://www.alphatronusa.com/crossreference.html#jrc
Last edited:
concentrik
Well-Known Member
Possibly both/either ways round. Thanks for the link; it suggests that only the JRC Radar 1000 and the JRC Radar 1500 used the type M1516 Magnetron and none of the Raytheon/Raymarine units do. Does this mean that there is no cross compatibility between the 1000/1500 and Raytheon badged products?
FullCircle
Well-Known Member
I guess so.... certainly the 1000 would not, it was a low budget special - actually very good for the money. I think the 1500 is also a 2Kw unit. My 1800 was a 4Kw unit.
At least you have part numbers to look on ebay for different makers systems all using the same parts with a different logo on them.
These magnetrons will be getting long in the tooth - they are hours dependent and will degrade and fail.
