Impellor part no wanted

[davidej]

I have a VP2030 with a Volvo water pump fitted which has no 3580945 on the cover plate.
It is rather unusual in that we seem to have one with a 1/2 inch shaft rather then the usual 12 (12.5?) mm. Can't understand why with a Swedish engine in a French boat.

Our local marine engineer keeps promising to get some spares in but these never arrive.

Can anyone tell me the impellor part no so I can get some on line?

Any ideas as to the best (cheapest)
source

 

[sailorman]

I have a VP2030 with a Volvo water pump fitted which has no 3580945 on the cover plate.
It is rather unusual in that we seem to have one with a 1/2 inch shaft rather then the usual 12 (12.5?) mm. Can't understand why with a Swedish engine in a French boat.

Our local marine engineer keeps promising to get some spares in but these never arrive.

Can anyone tell me the impellor part no so I can get some on line?

Any ideas as to the best (cheapest)
source

http://www.jabsco.com.au/impeller_select.pdf

 

[BabyBlue]

VP Pump

Key Parts in Watford have provided me a good service and price for VP parts http://www.keypart.com/

Give them a call and I'm sure they could help.

 

[VicS]

The number is the part number for an obsolete pump see http://www.marinepartseurope.com/en/volvo-penta-explodedview-7746800-26-202B.aspx

replaced by 3593655

The only impeller listed however is 3593659 see http://www.marinepartseurope.com/en/volvo-penta-explodedview-7746800-26-2474B.aspx

Check with http://www.keypart.com/volvo-penta as suggested

Note correct engine number is MD ( not VP) 2030 but there are A, B, C and D variants

 

[scottie]

VP have used both jabsco and Johnston pumps at various times on this range of engine
I would expect jabsco to be imperial size

 

[sailorman]

VP have used both jabsco and Johnston pumps at various times on this range of engine
I would expect jabsco to be imperial size

the impellers are interchangeable