i have a friend

sailbadthesinner

New member
Joined
3 May 2002
Messages
3,398
Location
Midlands
Visit site
who has one of those plastic boats
in order to stop him breaking his new rudder at sea and endangering his long suffering family
can anyone suggest a way he can avoid using it
i thought he could stream empty pot noodle pots from either side of the stern to create a drag to turn the boat
any other ideas?

<hr width=100% size=1>Beer. Source of and answer to all life's problems.
 

Evadne

Active member
Joined
27 Feb 2003
Messages
5,752
Location
Hampshire, UK
Visit site
He could fit two outboard brackets on the transom, and thus steer under power without the need for a rudder. I believe another forum member may have a quantity of tropical hardwood that could be used to fabricate these brackets.

<hr width=100% size=1>
 

sailbadthesinner

New member
Joined
3 May 2002
Messages
3,398
Location
Midlands
Visit site
i have only seen him use an outboard once
it refused to start on the return trip and as i recall he had forgotten the oars

<hr width=100% size=1>Beer. Source of and answer to all life's problems.
 

jhr

Well-known member
Joined
26 Nov 2002
Messages
20,256
Location
Royston Vasey
jamesrichardsonconsultants.co.uk
Hmm. He needs something that he can tow behind the boat to create variable resistance - which could perhaps be achieved by using some kind of hollow container with a valve and an inlet/outlet, that could be opened and closed to fill and empty the container, thus varying the drag to alter the direction of the boat.

Something like a holding tank would be ideal: I wonder if your friend has one hidden away somewhere?

<hr width=100% size=1>Je suis Marxiste - tendance Groucho
 

Evadne

Active member
Joined
27 Feb 2003
Messages
5,752
Location
Hampshire, UK
Visit site
It must be a small boat if he can consider using oars. Either that or he is a big chap, with big oars, but placid so you are noo afray of him. Obviously not a small ex-pat. Glasweedgin. With a funny hat.

<hr width=100% size=1>
 

jimi

Well-known member
Joined
19 Dec 2001
Messages
28,660
Location
St Neots
Visit site
Maybe he's an ex surfer with big sort of neck size hands?

Wee Killie Jimmy

<hr width=100% size=1>I Have The Body Of A God... Buddha
 

jimi

Well-known member
Joined
19 Dec 2001
Messages
28,660
Location
St Neots
Visit site
sod aff .. I've never held a tank in ma life .. I've restricted masell tae APCs!

<hr width=100% size=1>I Have The Body Of A God... Buddha
 

Twister_Ken

Well-known member
Joined
31 May 2001
Messages
27,584
Location
'ang on a mo, I'll just take some bearings
Visit site
Tropical hardwood bulletin.

Tropical hardwood all gone, mostly in small chisel sized pieces. Bruising healing nicely.

But here's a thing. When I was skipping my bitsnpieces, yard skip was full of big bits of timber. Some nice marina company had been resurfacing a pontoon and just cut off the old planking and dumped it. Teak planks!. As much as poss came home in the boot of the car. I hope it'll clean up and plane down nicely.

<hr width=100% size=1><A target="_blank" HREF=http://www.writeforweb.com/twister1>Let's Twist Again</A>
 

Twister_Ken

Well-known member
Joined
31 May 2001
Messages
27,584
Location
'ang on a mo, I'll just take some bearings
Visit site
Re: Tropical hardwood bulletin.

No. I checked again 3 days later and the skip had been emptied, either officially or unofficially. Not just timber, everything.

<hr width=100% size=1><A target="_blank" HREF=http://www.writeforweb.com/twister1>Let's Twist Again</A>
 

Rowana

Two steps lower than the ships' cat
Joined
17 Apr 2002
Messages
6,132
Location
NE Scotland
Visit site
I've also heard that Fray Bentos pie tins make excellent drogues. I believe that there is someone here is somewhat of an expert in them - but perhaps he is too engrossed in deck planking at the moment.

<hr width=100% size=1>
 
Top