Hose connector cap to fit collapsible water containers

[Slocumotion]

I'm looking for containers of,say, 5 or 10L plus a cap with hose connector that fits them, that I can leave connected to my galley sink pump.
This is the sort of reply I get from 'tinterweb :-

Dear michaelp****,

hi i think so it is not suitable to connect a hose somehow please send me your address...

Or no response.

Does anyone know of a suitable combination?
I've seen some inspirational videos of a chap moulding and machining blocks of reconstituted milk bottle plastic into such things but surely I don't need to get into that do I?

 

[Rigger Mortice]

http://www.worldofcamping.co.uk/sun...=09e4f3902355038353a19ca5e90fa3b0&fo_s=gplauk

 

[Slocumotion]

http://www.worldofcamping.co.uk/sun...=09e4f3902355038353a19ca5e90fa3b0&fo_s=gplauk

Yes , they're cheap enough to buy one extra just for the cap.

 

[neilf39]

How about this, assuming you have a self priming pump with a hose tail you can jubilee clip to the end.

http://www.leisureshopdirect.com/caravan/water/product_5241/aquaduct_supply_pipe.aspx

Alternative is to drop a small submersible pump into the water tank and fashion a bung from rubber for the pipe and leads.

 

[rogerthebodger]

All you need is a rubber stopper with a hole in so you can feed a plastic tube from the connector on your galley sink to the bottom of the water container

http://store.homebrewheaven.com/rubber-stoppers-p654.aspx

Rubber stoppers from your local home brew shop

Stopper should not be a tight fit so air can replace the water when pumping water out.

 

[theoldsalt]

..............Stopper should not be a tight fit so air can replace the water when pumping water out.

Not necessary with a collapsible water container.