Steve65
Active member
Hi, I have had a few people ask regarding supply of Stainless bolts to replace Mild steel in Honda 2d and 2.3 outboards. Unfortunately I no longer sell these but here are the specs should you wish to purchase your own.
Powerhead bolts - 4 x m6 x 60mm
Leg to Clutch bell housing bolts 3 x m6 x 30mm
There are other m5 bolts on the engine that I would only replace if already repairing an engine
Rocker bolts 4 x m5 x 12mm
Manifold bolts 2 x m5 x 16mm and other misc bolts all m5 ranging from 10mm to 20mm.
I tend to use flanged hex head
If your engine is a 2.3 some leg to clutch bell bolts are Allen head m6 x 30mm, these dont tend to rust.
Hope this may help one or two of you
Steve
Powerhead bolts - 4 x m6 x 60mm
Leg to Clutch bell housing bolts 3 x m6 x 30mm
There are other m5 bolts on the engine that I would only replace if already repairing an engine
Rocker bolts 4 x m5 x 12mm
Manifold bolts 2 x m5 x 16mm and other misc bolts all m5 ranging from 10mm to 20mm.
I tend to use flanged hex head
If your engine is a 2.3 some leg to clutch bell bolts are Allen head m6 x 30mm, these dont tend to rust.
Hope this may help one or two of you
Steve