Hex Die Crimpers

[Ian_Rob]

I‘m after some hex die crimpers that would be suitable for the following co-axial cable sizes:

• LMR-400: 0.429″ (10.89 mm)
• LMR-240: 0.255″ (6.48 mm)
• LMR-195: 0.213″ (5.4 mm)

There are a number of single tools available from the US around $50 (eg the CRT L400) that work with all three sizes (and more ) but by the time shipping and duty are factored in they become quite expensive. I can’t find an equivalent budget tool available in the U.K? Any suggestions?

 

[ChromeDome]

Google finds some in the UK, prices seem to start at £42.

None good for you?

Google "hex" die crimper tool site:.uk

 

[PetiteFleur]

There a couple on ebay at the moment - £25 & £35 - used and in the uk

 

[HissyFit]

Is this the type of thing you're looking for?

Farnell

RS Components

If not, I'm sure you'll find something suitable amongst their catalogue.

 

[Ian_Rob]

That’s the sort of thing but having looked at both websites previously, they don’t seem to do one tool that covers these three particular sizes. I did look again this morning after ChromeDomes post and found a Taiwanese, two die-set crimper with the correct die sizes on Amazon but it isn‘t available at the moment.

Thank you.

PS I could buy separate tools to cover the sizes I‘m after but …………