Help - broken Tiller

fjweaver

Member
Joined
16 May 2001
Messages
256
Location
Middlesex
Visit site
Trying to sail to Yarmouth en route to Cherbourg and the tiller has split at the end. I've got a Hunter Ranger 265. Does anyone know somewhere in the Hamble area where I can get a quick repair/replacement done? Would like to sail again by the end of tomorrow - meant to be taking family to Cherbourg for our holiday.
Thanks very much.
 

NPMR

Well-known member
Joined
14 Feb 2006
Messages
2,286
Location
Cornwall
Visit site
Is it wood?

Can you splice/glue/bind it?

We repaired ours this way many years ago and it is still sound as a bell.
 

exfinnsailor

New member
Joined
18 Jul 2007
Messages
1,779
Visit site
Epoxy Glue and bind it with thin twine .. Its how the use to repair chair legs but they used water based glue .. Twine helps hold it all together .. /forums/images/graemlins/smile.gif
 

30boat

N/A
Joined
26 Oct 2001
Messages
8,558
Location
Portugal
Visit site
Clean the mating areas and glue with fast curing Araldite.Bind with twine or stout tape.Once cured protect from sunlight with varnish or paint.It''ll last forever.
 

Amari

New member
Joined
23 Nov 2004
Messages
250
Location
Suffolk/Turkey
Visit site
My previous boat was a Hunter 265 and purchased from Hunter's retail outlet on the Hamble (forget exactly where, nor sure if still operate from there since being taken over)
 

Other threads that may be of interest

Top