Hand Operated Bilge Pump !! Brodrene skulstad A-315

[rodd234]

Can anyone tell me if you can still get spare parts for this Bilge pump ?
The Rubber pump seal has gone after many a good pump !!!
And needs replacing .............
Can anybody point me in the Right Direction!!!!!!!!!!

Brodrene Skulstad Model A-315..........
Thanks.............................................................

 

[petie]

I can do you an almost new Viking Bulkhead pump, One and a half inch, if you are interested.

 

[RobFerguson1]

I can do you an almost new Viking Bulkhead pump, One and a half inch, if you are interested.

I have the same problem, i.e. sourcing a washer for a pump that is about 35mm in diametre.
Can you help?

 

[rogerthebodger]

Can anyone tell me if you can still get spare parts for this Bilge pump ?
The Rubber pump seal has gone after many a good pump !!!
And needs replacing .............
Can anybody point me in the Right Direction!!!!!!!!!!

Brodrene Skulstad Model A-315..........
Thanks.............................................................

Is this any help.

Google Translate

Or this

Skulstad Lænsepumpe 50 ltr/min 63x550mm

 

[RobFerguson1]

Is this any help.

Google Translate

Or this

Skulstad Lænsepumpe 50 ltr/min 63x550mm

Cripes - this is the correct manufacturer, the red triangle motif is on my pump but it is much smaller. It is also the right design.

I do not know the flow rate of my pump but the diameter if the cup washer is 34mm, I only have this with me, the rest is on the boat.
Assuming the barrel wall thickness is 2mm that would make the pump diameter 38mm.
The barrel length I would estimate to be around 240mm.

 

[rogerthebodger]

Cripes - this is the correct manufacturer, the red triangle motif is on my pump but it is much smaller. It is also the right design.

I do not know the flow rate of my pump but the diameter if the cup washer is 34mm, I only have this with me, the rest is on the boat.
Assuming the barrel wall thickness is 2mm that would make the pump diameter 38mm.
The barrel length I would estimate to be around 240mm.

I would fire off an E mail to either or both asking your questions.