Engineering co sought for seized Eber -Solent area

[crazy4557]

Hoping you might be able to help with a recommended engineering co?

I have an Eberspacher D5 heater and the 4 bolts/screws holding the chamber together have seized so I cannot split the chamber to clean it. I have tried penetrating oil and an impact driver but they won't budge.

I'm in Lymington and need an engineering co to work their magic, do you know a suitable firm within a reasonable range? Happy to travel to Southampton/Portsmouth area if needed.

Any replies are appreciated.

 

[Martin_J]

Lymington... you're right near the main guys who sell, fit and service these units..

A couple of guys who really seem to know their Eberspachers...

Krueger - based in New Milton

 

[Ex-SolentBoy]

Lymington... you're right near the main guys who sell, fit and service these units..

A couple of guys who really seem to know their Eberspachers...

Krueger - based in New Milton

Just make sure you have access to large mounts of money before you leave your unit with them. I had a frightening bill from them and they were not the most cooperative supplier I have had service from , to put it mildly.

 

[pcatterall]

Is it a D5LC ? I ask because I have one in my garage. Its without an ECU or wires as I 'lent' them to a local church minibus organiser so he could test his own..... long story but they never came back ( most unchristian I thought among other things) It is in very good nick.
Pm me if it is a D5 and you are interested.

 

[crazy4557]

Lymington... you're right near the main guys who sell, fit and service these units..

A couple of guys who really seem to know their Eberspachers...

Krueger - based in New Milton

It's at Kruger in Portsmouth, they have tried the penetrating oil and impacy driver and can't budge them!!!!

Needs more surgery me thinks