Endoscope to check below waterline

killick

New member
Joined
19 Sep 2011
Messages
75
Location
Durban South Africa
Visit site
I want to buy an endoscope to check my boats anodes and screw.
There is such a vast number of different models available that I am at lost as to which one to buy.
Could someone kindly advise which features should be looked for to suit my purpose
 

maby

Well-known member
Joined
12 Jun 2009
Messages
12,783
Visit site
Check the reach of them before purchasing - most to the relatively cheap devices cannot reach far enough to be very useful. We have a friend who is a plumber and has a drain monitor CCTV - the probe must be more than 10m long - that works very well, but I believe he claimed that the purchase price was well on the way to £10k...

The resolution of the cheap devices is typically 640x480 or less and the probe is rarely much more than a metre long. That may be enough for a relatively small boat with a shaft drive but as soon as you get up to 30 foot or more or have a saildrive, you will probably not be able to get the lens close enough to the object that you want to inspect to see it in any detail.
 

maby

Well-known member
Joined
12 Jun 2009
Messages
12,783
Visit site
Why not a go pro on a stick
Has more uses than poking up your b..m & looking at your anode

far more difficult than you would think to get it into a position where you can see the thing you want to inspect unless you have a live feed. Even with a live feed, it is a fiddly job.
 
Joined
25 Feb 2010
Messages
12,982
Visit site
far more difficult than you would think to get it into a position where you can see the thing you want to inspect unless you have a live feed. Even with a live feed, it is a fiddly job.

If bluetooth will work through water, and I have no idea if it will, then a live feed with a Go pro is very easy to setup.
 

maby

Well-known member
Joined
12 Jun 2009
Messages
12,783
Visit site
If bluetooth will work through water, and I have no idea if it will, then a live feed with a Go pro is very easy to setup.

I would be very surprised if bluetooth would penetrate any depth of water - it's running at microwave frequencies very close to those used in a standard microwave oven - absorption by water will be high, I would expect.
 

Martin_J

Well-known member
Joined
19 Apr 2006
Messages
4,403
Location
Portsmouth, UK
Visit site
Nigel.. How do you then direct the camera where you need it to be? or is the cable more like a spring?

I have something more like this... http://www.ebay.co.uk/itm/USB-Endoscope-Inspection-Camera-Borescope-Snake-Scope-Ultra-thin-7mm-Camera/130993507412?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D22703%26meid%3D7896000840937092166%26pid%3D100011%26prg%3D9178%26rk%3D6%26rkt%3D10%26sd%3D221061271843

but 3m long and is quite easily directable to wherever it needs to be behind cabinets, cupboards etc.

I have not tried it underwater yet but will try to take a look at the anodes using it this weekend.
 

lpdsn

New member
Joined
3 Apr 2009
Messages
5,467
Visit site
I bought one. Not really that useful for checking the anodes as field of vision quite small. I have found it invaluable for tracing wiring and checking in difficult to access places. Apparently also suitable for ear, nose & throat operations, but I've not attempted any of those yet.
 
Top