Eberspacher pipe work

neil1967

Well-known member
Joined
28 Nov 2007
Messages
1,141
Location
Tavira, Portugal
Visit site
The Eberspacher warm air pipes on our newly acquired Oyster 406 have seen better days and need replacing. The original piping looks both stiff and delicate, and thus difficult to install through the numerous holes and bends. Any suggestions for alternative pipe work?

Thanks

Neil

Sorry, should be in PBO. Will repost
 
Last edited:

bjvarley

New member
Joined
22 May 2010
Messages
57
Location
On Alixora wherever we are (now Turkey))
alixora.posterous.com
I've been patching up our Eberspacher pipework today..so a few comments..
Our old (15 year?) pipe is very delicate and breaks up if you try to bend it,
I bought some new pipe a couple of years ago and that, though stiff, is not delicate (expensive though).. I didn't buy enough so now I'm patching up the remaining old bits. Discovered today 3 inch drainpipe fits inside the pipes very well..might melt but I suspect not, to join up broken bits.
If you can get the real thing new probably best to do it.
Brian.
 
Top