code2006
New Member
hi
i have a 12v eberspacher d2 connected straight to a 12v leisure battery but i removed the battery last night to charge it up.
when i reconected the battery my 701 7 day timer had no power. i check the fuses and they are fine
there was no power going to the timer but will have to re check this again later
there was power going through the loom to one of the connectors wich i managed to take apart ( were the tick yellow wire changed into red wire)
i dont know what else to check
could the ecu be fried?
thanks alex
i have a 12v eberspacher d2 connected straight to a 12v leisure battery but i removed the battery last night to charge it up.
when i reconected the battery my 701 7 day timer had no power. i check the fuses and they are fine
there was no power going to the timer but will have to re check this again later
there was power going through the loom to one of the connectors wich i managed to take apart ( were the tick yellow wire changed into red wire)
i dont know what else to check
could the ecu be fried?
thanks alex