jay
New member
Has anyone got a manual for a D1L (not the "C" Compact version). Can you tell me what ampage the 24v version requires at startup please?
Thanks in advance
<hr width=100% size=1>
Thanks in advance
<hr width=100% size=1>
Eber Info needed
- Thread starter jay
- Start date
Talbot
Active member
Eber Tech manuals can be downloaded from <A target="_blank" HREF=http://www.espar.com/htm/tecmans.htm>Here</A>
<hr width=100% size=1>
<hr width=100% size=1>
jay
New member
thanks Talbot. Unfortunatley that doesnt go as far back as the D1L.
<hr width=100% size=1>
<hr width=100% size=1>
pvb
Well-known member
Can\'t imagine it\'s changed much...
I doubt whether the start-up current has changed much. Allow for 11.5A. Important thing is to ensure the voltage at the control box doesn't drop below about 21v otherwise it'll shut down.
<hr width=100% size=1>
I doubt whether the start-up current has changed much. Allow for 11.5A. Important thing is to ensure the voltage at the control box doesn't drop below about 21v otherwise it'll shut down.
<hr width=100% size=1>