penultimate
New member
My chrome on brass deck fillers for both fuel and water have 3/16" lugs diametrically spaced at 1.375". Any idea where I can obtain replacements, please?
Deck Filler Keys
- Thread starter penultimate
- Start date
TrueBlue
Well-known member
Ditch crawlers do it cheaper, try:-
Uxbridge Boat Centre Tel: 01895 252019
Fax: 01895 811035
Email ubc@uxbridge99.fsnet.co.uk
Midland chandlers (Penkridge, Staffs)
Tel: 01785 712437
Fax: 01785 714666
Email: kevinmc@btconnect.com
Both do mail order. NarrowBoat chandlers are relatively unsophisticated so no web sites. Be interested to know if they are cheaper than SeaSide swindleries.
AP Lifting Gear are (possibly) trade only, but do a cheapie S/S flat plate variety about a squid or so, buy half a dozen to tide you over:-
Tel: (01384) 250552
Fax: (01384) 250282
Uxbridge Boat Centre Tel: 01895 252019
Fax: 01895 811035
Email ubc@uxbridge99.fsnet.co.uk
Midland chandlers (Penkridge, Staffs)
Tel: 01785 712437
Fax: 01785 714666
Email: kevinmc@btconnect.com
Both do mail order. NarrowBoat chandlers are relatively unsophisticated so no web sites. Be interested to know if they are cheaper than SeaSide swindleries.
AP Lifting Gear are (possibly) trade only, but do a cheapie S/S flat plate variety about a squid or so, buy half a dozen to tide you over:-
Tel: (01384) 250552
Fax: (01384) 250282
penultimate
New member
Thanks
Krusty
New member
Two machine-screws (stainless) througha bit of hardwood at the right spacing works! Mine has been in use for at least ten years: lives in a cockpit cave locker.
VicMallows
New member
A man after my own heart .... even if I couldn't get much further South!. Yes, fabricate, it's easy. Same applies to the 'special' tool to undo Barlow winches; and many other similar situations.
Vic
Vic