Cranchi Aquamarina 31 deadrise angle

[Ian MacAulay]

Afternoon..

Anyone happen to know the deadrise angle in the engine compartment of my Aquamarina ?

Thanks

Ian

 

[gjgm]

No one else seems to know!
You could email Cranchi in in Italy..they don,t seem to list non current boats.Out of interest why do you want to know?
As a rough guide if you have no fillings left it is about 18, and if your smile is like Tom Cruise,s then it is about 24. Unless the boat was specifically a sea crusher, I would guess around 20.

 

[Ian MacAulay]

Sounds a good guess to me.. Raymarine state it needs to be within 5° so 20 would suit

It's for a new in hull transducer to like on to my Raymarine E7D.. Unfortunately I still have to mount a transom mount one for the down vue

Thanks

Ian

 

[gjgm]

Sounds a good guess to me.. Raymarine state it needs to be within 5° so 20 would suit

It's for a new in hull transducer to like on to my Raymarine E7D.. Unfortunately I still have to mount a transom mount one for the down vue

Thanks

Ian

I thought it might be for that- personally, I wouldn't worry too much. Unless you really want to know shallow water down to the exact cm, it will be accurate enough.