converting an old Evinrude 2HP outboard magneto from points and condenser to ignition module

[Steve65]

Is the powerhead in good working order, good compression, bearings and has a good water flow. The ignition should be the last thing to look at on this engine

 

[peterhull]

I didnt fit it on an evinrude i fitted it to a 2b Yamaha.The timing needs to be correct and will be different to original.

OK Steve thanks for in information.

 

[Steve65]

Hi this is what i fitted

 

[peterhull]

Hi this is what i fitted
[/QUOTEThanks Steve. Interesting. How much did it cost?

 

[Steve65]

£15

 

[peterhull]

£15
[/QUOTE reasonable