2222222
New member
Anyone know if contact adhesive is alright for sticking down Treadmaster?
Contact adhesive
- Thread starter 2222222
- Start date
starboard
Active member
Why not.....if it is good enough for the underwater fairing boot of a saildrive unit it should do the job for the tread master.
Paul.
Paul.
Talbot
Active member
will certainly make it a lot easier to remove than the standard epoxy!
eyupdougdown
New member
There's a two part contact adhesive that's suitable for use with treadmaster - or the stuff in the green tin - 528
A
Anonymous
Guest
My father put down a large area of Treadmaster with contact adhesive on a 45' motor boat and it lasted until he sold it more than 10 years later with no signs of problems. For most of that time it was on the Italian Riviera so often got very hot. I'm fairly sure that he used Thixofix.
2222222
New member
Ta. I'll get sticking then
youngwrinkley
Member
We have just stuck our treadmaster down with a two pot contact adhesive S2000 supplied by Seals+ Direct They say it is the stuff the RNLI Use. With the cost of Treadmaser as high as it is it seemed right to use "the best" adhesive. their web is at HTTP://www.sealsplusdirect.co.uk
Good luck
Good luck
A
Anonymous
Guest
I've just remembered that the biggest issue was having an adhesive that would allow you to slide the Treadmaster into exactly the right position - presumably a glue like Evo Stik would not let you slide it into place. I think that was one of the benefits of Thixofix. Don't Treadmaster recommend an adhesive?