Chain Gipsy for Simpson Lawrence Windlass for 10mm Chain

gonetotheboat

Member
Joined
28 Feb 2010
Messages
258
Location
Me: Thames Valley, Boat: France
Visit site
This Gipsy was removed from a Simpson Lawrence SL Anchorman Manual Windlass.
It is for use with 10mm calibrated chain or [3/8"]
It was used for 1 season before I switched to 8mm chain and had to swap the gypsy for a matching 8mm one.
Hence it has virtually no wear at all, although the surfaces are very dull as would be expected having been exposed to the elements on the foredeck for a season and then stored in my loft ever since.
It fits 10mm calibrated chain, so it has 6 teeth.
It is marked with letter V and number 162, if that's any help, but all that really matters is that you want to haul 10mm chain with an SL Anchorman Windlass!

Can't think what else to add!

£70
If you have any questions please ask.
View & collect in Maidenhead near M4 J8/9

Happy to post to normal UK address for a fiver. [Highlands and Islands, and EU countries please contact me so I can check pricing ]
 

Attachments

  • DSC03869w.jpg
    DSC03869w.jpg
    64.9 KB · Views: 2
  • DSC03868w.jpg
    DSC03868w.jpg
    90.6 KB · Views: 1
  • DSC03867w.jpg
    DSC03867w.jpg
    90.1 KB · Views: 0
  • DSC03870w.jpg
    DSC03870w.jpg
    89.1 KB · Views: 2

Legend 40.5

New member
Joined
4 Aug 2017
Messages
4
Visit site
Good morning - do you know if this gipsy equally fits an Anchorman powered windlass? I need a 10mm gipsy as I have new chain and it slips on the existing gipsy. Many thanks for your help. Jim
 
Top