Beneteau Holding tank hose fittings

R

RJD393

Well-Known Member
Joined
4 Dec 2002
Messages
175
Location
Dorset
Visit site
I have a cracked plastic fitting on my holding tank (nasty!) The tank is made by l'Oceane des plastics in France and the fitting is a straight fitting and a 90degree elbow 40mm OD with a female threaded cap. See picture for better idea. Anyone know where I may be able to source a replacement. I have contacted Beneteau but so far no help.DSC02302.jpgDSC02303.jpg
Richard
 
Thanks for the thought - had checked Ebay but the cap is not any BSP thread listed. It has a max dia of 52 mm and 8Tpi!
 
Hi,
Suggest having a word with a company called "Industrial Links". They are based in Upton, Poole so hopefully not too far. Contact number is 01202-632996.
No vested interest just a satisfied customer.

Regards

Paul
 
Paul - thanks for the suggestion. Popped in to see them this afternoon - very helpful but alas had nothing to match. Will keep trying.
 
Which model do you have? I am looking to install a holding tank in our 323 and have been told by Beneteau that the original tank was made by vetus.
 
Hi Richard

I too have found a cracked elbow fitting (identical to your picture) on my 331 holding tank. Did you have any success in sourcing a replacement? Any pointers would be much appreciated as I’ve drawn a blank so far.

Many thanks

Rob.
 
Robg1 said:
Hi Richard

I too have found a cracked elbow fitting (identical to your picture) on my 331 holding tank. Did you have any success in sourcing a replacement? Any pointers would be much appreciated as I’ve drawn a blank so far.

Many thanks

Rob.
Click to expand...

Well if you take your drawing of a blank to a local workshop they should be able to knock one up.?
 
Why not contact L'océane des plastics and ask them for help? Their website stresses how good they are at satisfying customers!
 
You must log in or register to reply here.

Share this page

Top